The Central Vacuum Hose Hanger is the perfect way to store your central vacuum hose. Plus the the two hooks in the front Will hold the gas pump style hose handle. Hoses left on the ground or in the vacuum will get damaged much sooner than a hose properly hung up after use. With the hose unplugged at both ends, make four or five loops on the ground then lift it up and put it into the hose hanger.

The new Hide a hose Valve has been made 38% smaller! Measures just 4.4 x 6.3”. Fits within a normal 2 x 4” wall. Improved door seal ensures maximum suction throughout entire Hide-a-hose system. With the "The Retractable Hose Central Vac System," the vacuum hose is stored inside the wall. Each outlet has a hose hidden within the system´s own vacuum tubing. When finished using, the suction from the central vacuum unit retracts the hose back out of sight. Then, it may simply carry your handle to the next inlet.

Dimension:  4.4 x 6.3″ (11.2 x 16.0cm)
Color: Almond

Dyson internal hose assembly

• Fits: Dyson internal hose assembly for models DC07 DC14 and DC33

Hoover Solution Tank Cap.

• The solution tank cap is designed to fit various Hoover model vacuums.

• This part is compatible with models including; F5918-900,F5899-100,FH50020,FH50015,FH50045,F5906900,F5915-100,FH50046,F5810,F5917-900,F5835-900,F5915-900

• Discontinued, Limited quantity 

If you are installing a new central vacuum or already have one installed you will love using the Central Vac Vacpan Almond in your kitchen, laundry room, or bathroom. The VacPan almond are excellent for high traffic areas like kitchens. They offer the convenience of sweeping dirt right up to the VacPan and simply kicking the switch to activate the vacuum and remove the debris. Perfect to use at home.

Dimension: 10 x 7 x 2.7 inches
Material: Plastic
Color: Almond

With the "The Retractable Hose Central Vac System", the vacuum hose is stored inside the wall. Each outlet has a hose hidden within the system´s own vacuum tubing. When you´re finished, the suction from the central vacuum unit retracts the hose back out of sight. Then, you simply carry your handle to the next inlet.

Since being first being introduced, Hide-A-Hose was a revolutionary idea.  Hide-A-Hose has never been a company happy with the status quo, so they are at it again with an all new valve design. This valve is smaller and features many improvements over the orginal valves.

• White Inlet Valve
• Finish Door
• Low Voltage On and Off Switch
• 4 Installation Screws
• 2 Wire Nuts

Dimension: 4.4 x 6.3in

Riccar/Simplicity black fan duct cover.

• Designed to fit Simplicity models-F3300C, F3400, F3500, F3500C, F3600, F3700, F3700C, S10W, F3100

• It also fits Riccar Supralite models-RSL1A, RSL1AC, RSL2, RSL3, RSL3C, RSL4, RSL5C

The Hide A Hose Valve Rough-in Kit is the required mounting plate for all of the New HS5000 Hide-A-Hose Style Trim Kits. These Rough-in kits in conjunction with the new HS5000 Trim kit will allow for a maximum wall thickness of 1 ½” and fit within a normal 2×4” wall. To prevent the rapid flex hose from stretching and getting stuck in a standard fitting, install a reducer in the pipe run a few feet past the length of the hose.

• 1 rough in frame
• 1 rough in pipe fitting
• 1 reducer
• 1 mud cover
• 4 mud cover screws.

The Hide A Hose Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. Hide-A-Hose is usually installed in the wall, but it can be installed on the surface of the wall, or on the floor, ceiling, or on a counter. Use this box instead of a HS4000 rough-in plate. Pipe or a HAH 90 attaches to it and the HS4000 trim kit fits inside of it. The box with pipe connector is 12 inches long, 6-1/2 inches wide, and 5 inches tall. Central vac pipe fits into the connector. You will need minimum of 24 inches of depth if you lay this down in a cabinet.

Dimension: 12 x 6.5 x 5 inch

The Wireless Remote Hide-A-Hose Ready-Grip RF Kit is a great way to turn your Hide-A-Hose vacuum system on and off remotely – the Remote Handle will give you the ability to turn the system on and off from the handle without going back to the valve!

This kit includes everything needed to activate 1 wireless Hide-A-Hose handle and includes the required control mechanism that must be connected to your central vacuum power unit. If only an extra wireless handle is needed, please see our Wireless Hide-a-Hose Ready-Grip RF Handle). If 2 wireless handles are desired for a home, only 1 kit needs to be purchased, while an additional handle ONLY may be purchased.

Manufacturer Part Number: HS302181C

This Deluxe Turbo Floor Nozzle is an ultra lightweight turbine power head designed for minimal amount of carpeting and bare floors. Air driven and equipped with a double swivel neck design, the Deluxe Turbo is easy to maneuver and the operation is as simple as it gets. The Deluxe Turbo is ABS constructed which will help provide the nozzle more years of reliable operation. Ideal to provide the nozzle more years of reliable operation.

Dimension: 11 x 10 x 2.5 inches
Color: Black
Item Weight : 9.6 ounces

If you are installing a new central vacuum or already have one installed you will love using the Central Vac Vacpan White in your kitchen, laundry room, or bathroom. The VacPans white are excellent for high traffic areas like kitchens. They offer the convenience of sweeping dirt right up to the VacPan and simply kicking the switch to activate the vacuum and remove the debris. Perfect to use at home.

Dimension: 10 x 7 x 2.7 inches
Material: Plastic
Color: White

If you are installing a new central vacuum or already have one installed you will love using the Central Vac Vacpan Black in your kitchen, laundry room, or bathroom. The VacPan black are excellent for high traffic areas like kitchens. They offer the convenience of sweeping dirt right up to the VacPan and simply kicking the switch to activate the vacuum and remove the debris. Perfect to use at home.

Dimension: 10 x 7 x 2.7 inches
Material: Plastic
Color: Black

The Central Vac Turbo Tool Basic is a terrific tool which has a spinning brush activated by the suction of your unit. This tool is great for cleaning your furniture, stairs, drapes, bed linens, small area rugs, and the upholstery of your car. If you have pets in your home, you don't want to live without this hand held turbine which removes embedded pet hair from rugs and upholstery. 

This Central Vac Hose Sock will protect your wood floors as well as walls and furniture legs. It will also protect the hose. Can zips and unzips easily for easy assembly and removal. High quality knit is machine washable!

Electrolux Guardian Wands (2 Pcs)

• Blue and White 2-tone wand designed to fit Electrolux 6500, 7000, Lux 9000, Central Vacs, Guardian, Epic 8000 and Renaissance.

Oreck XL Black Grip

• Works with XL21/Platinum/Pilot Series vacuums

Oreck White cord w/strain relief

• 30' white, 2-wire Oreck power cord harness assembly is designed for the 3000 series vacuums. It also includes U4120H2B, U4120H2P, U4120H2R an dU4140.
  

Oreck XL Base Plate assembly

• This is a base plate for various Oreck/Royal vacuums, including; U7000 and XL21 Series.

Oreck Complete Base plate

• Gray Base assy, for U2000 Series Uprights

Kirby Front Bracket

• Axle Shaft, Front Bracket Fits: 1CR To Legend II and most other G series

Kirby Sentria Power Cord

• The 32' dark gray Kirby power cord is designed to fit the Sentria vacuum cleaner models.

Kirby Fill Tube

• This bag fill tube is designed to fit various Kirby model vacuums.

• Fits Kirby 1HC, 1HD, 2HD, G3, G4, G5, G6, Heritage 2 Legend, Legend 2, Ultimate G, Diamond Edition and Sentria vacuums

Kirby 2nd Generation Power Cord

• The 32' black Kirby power cord is designed to fit Legend I, Legend II and Heritage II vacuum cleaning systems and will assist you in protecting your vacuums delicate electronic components.

Kirby Power Cord First Generation

• The 32' black Kirby power cord is designed to fit 3CB and 1CB vacuum cleaner models.

Heat Surge Heater Element.

• Heating element with 2 coils, low and high w/infrared coating.

Cirrus CR99 Hepa

• HEPA exhaust filter Cirrus upright models: CR79, CR89, CR99 and CR9100.