The Wireless Remote Hide-A-Hose Ready-Grip RF Kit is a great way to turn your Hide-A-Hose vacuum system on and off remotely – the Remote Handle will give you the ability to turn the system on and off from the handle without going back to the valve!
This kit includes everything needed to activate 1 wireless Hide-A-Hose handle and includes the required control mechanism that must be connected to your central vacuum power unit. If only an extra wireless handle is needed, please see our Wireless Hide-a-Hose Ready-Grip RF Handle). If 2 wireless handles are desired for a home, only 1 kit needs to be purchased, while an additional handle ONLY may be purchased.
Manufacturer Part Number: HS302181C
Hide A Hose Valve Trim Kit (white)Regular price $139.99 Save $-139.99
With the "The Retractable Hose Central Vac System", the vacuum hose is stored inside the wall. Each outlet has a hose hidden within the system´s own vacuum tubing. When you´re finished, the suction from the central vacuum unit retracts the hose back out of sight. Then, you simply carry your handle to the next inlet.
Since being first being introduced, Hide-A-Hose was a revolutionary idea. Hide-A-Hose has never been a company happy with the status quo, so they are at it again with an all new valve design. This valve is smaller and features many improvements over the orginal valves.Kit Includes:
Dimension: 4.4 x 6.3in
Hide A Hose HandleRegular price $49.99 Save $-49.99
Hide A Hose 90 ElbowRegular price $13.99 Save $-13.99
Genuine Hide A Hose 90 Degree Sweep Elbow. These 90 degree elbows are 16” long and provide for the least possible resistance to airflow. Hide-A-Hose installations require these larger fittings to be used in order to have the vacuum hose retract back into the piping smoothly. Most Hide-A-Hose port locations utilize around 2 to 4 of these Hide-A-Hose Sweep 90’s.
Hide A Hose Valve Trim Kit (almond)Regular price $139.99 Save $-139.99
The new Hide a hose Valve has been made 38% smaller! Measures just 4.4 x 6.3”. Fits within a normal 2 x 4” wall. Improved door seal ensures maximum suction throughout entire Hide-a-hose system. With the "The Retractable Hose Central Vac System," the vacuum hose is stored inside the wall. Each outlet has a hose hidden within the system´s own vacuum tubing. When finished using, the suction from the central vacuum unit retracts the hose back out of sight. Then, it may simply carry your handle to the next inlet.
Dimension: 4.4 x 6.3″ (11.2 x 16.0cm)
Hide A Hose Valve Rough-in KitRegular price $40.00 Save $-40.00
The Hide A Hose Valve Rough-in Kit is the required mounting plate for all of the New HS5000 Hide-A-Hose Style Trim Kits. These Rough-in kits in conjunction with the new HS5000 Trim kit will allow for a maximum wall thickness of 1 ½” and fit within a normal 2×4” wall. To prevent the rapid flex hose from stretching and getting stuck in a standard fitting, install a reducer in the pipe run a few feet past the length of the hose.
Hide A Hose Stand Alone Mounting KitRegular price $99.99 Save $-99.99
The Hide A Hose Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. Hide-A-Hose is usually installed in the wall, but it can be installed on the surface of the wall, or on the floor, ceiling, or on a counter. Use this box instead of a HS4000 rough-in plate. Pipe or a HAH 90 attaches to it and the HS4000 trim kit fits inside of it. The box with pipe connector is 12 inches long, 6-1/2 inches wide, and 5 inches tall. Central vac pipe fits into the connector. You will need minimum of 24 inches of depth if you lay this down in a cabinet.
Dimension: 12 x 6.5 x 5 inch